Skip to content
Wi-Fi Routers

Teltonika RUT955 4G LTE Router

Brand: Teltonika

Updated

Specifications

General

Model RUT955
Dual SIM Significantly reduce roaming costs
Mobile module 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps
SIM switch 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
Status Signal strength, SINR, RSRP, RSRQ, Bytes sent/received
Bridge Direct connection (bridge) between mobile ISP and device on LAN
SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
Black/White list Operator black/white list
Multiple PDN (optional) Possibility to use different PDNs for multiple network access and services
Band management Band lock, Used band status display
Wireless mode IEEE 802.11b/g/n, Access Point (AP), Station (STA)
WiFi WPA2-Enterprise (with external/internal Radius server), WPA2-PSK, WPA-PSK, WEP, MAC Filter
WiFi security WPA2-Enterprise – PEAP, TLS, TTLS. AES-CCMP, TKIP, Auto Cipher modes. Client separation
SID SSID stealth mode and access control based on MAC address
WiFi users up to 100 simultaneous connections
Hotspot Captive portal (Hotspot), internal/external Radius server, built-in customizable landing page
WAN 1 x WAN port (can be configured to LAN) 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
LAN 3 x LAN ports, 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
Routing Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2)
Network protocols TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, MQTT, Wake On Lan (WOL)
VoIP passthrough support H.323 and SIP-all protocol NAT helpers, allowing proper routing of VoIP packets
Connection monitoring Ping Reboot, Periodic Reboot, LCP, and ICMP for link inspection
Firewall Port forward, traffic rules, custom rules
DHCP Static and dynamic IP allocation, DHCP Related
QoS Traffic priority queuing by source/destination, service, protocol, or port, WMM, 802.11e
DDNS Supported >25 service providers, others can be configured manually
Network backup VRRP, Mobile, Wired, and WiFi WAN options, each of which can be used as a backup, using automatic Failover
Load balancing Balance your internet traffic over multiple WAN connections
NetSnapper (optional) Mobile connection management, data compression VPN client (not available in standard FW)
SSHFS (optional) Possibility to mount remote file system via SSH protocol (not available in standard FW)
Authentication The pre-shared key, digital certificates, X.509 certificates
Attack prevention DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention ( SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
VLAN Port-based and tag-based VLAN separation
Mobile quota control Set up custom data limits for both SIM cards
WEB filter Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only
Access control Flexible access control of TCP, UDP, ICMP packets, MAC address filter
OpenVPN Multiple clients and servers can be running simultaneously, 12 encryption methods
OpenVPN Encryption DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
IPsec IKEv1, IKEv2, supports up to 4 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)
GRE GRE tunnel
PPTP, L2TP Client/Server services can run simultaneously
Stunnel Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the programs’ code
SSTP SSTP client instance support
WEB UI HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
FOTA Firmware update from server, automatic notification
SSH SSH (v1, v2)
TR-069 OpenACS, EasyCwmp, ACSLite, them, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTT MQTT Broker, MQTT publisher
SNMP SNMP (v1, v2, v3), SNMP trap
JSON-RPC Management API over HTTP/HTTPS
MODBUS MODBUS TCP status/control
RMS Teltonika Remote Management System (RMS)
CPU Atheros Wasp, MIPS 74Kc, 550 MHz
RAM 128 MB, DDR2
FLASH memory 16 MB SPI Flash
Keep settings Update FW without losing current configuration
Operating system RutOS (OpenWrt based Linux OS)
Supported languages Busybox shell, Lua, C, C++
Development tools GPL package with the built environment provided
GNSS GPS, GLONASS, BeiDou, Galileo and QZSS
Coordinates GNSS coordinates via WebUI, SMS, TAVL, RMS
NMEA NMEA 0183
STRIP NTRIP protocol (Networked Transport of RTCM via Internet Protocol)
Server software supported server software TAVL, RMS
Mobile Network Geolocation Location without using GPS, get approximate location based on the mobile tower on RMS
Geofencing Configurable multiple geofence zones
RS232 DB9 connector, full RS232 (with RTS, CTS)
RS485 RS485 Full Duplex (4 wires) and Half-Duplex (2 wires). 300-115200 baud rate
Serial functions Console, Serial over IP, Modem, Modbus gateway, NTRIP Client
Input 3 x Input (0 – 3 V digital input / 0 – 30 V digital galvanically isolated input / 0 – 24 V analog input)
Output 2 x Output (30 V, 250 mA digital open collector output / 40 V, 4 A SPST relay output)
Events SMS, EMAIL, RMS
Data rate USB 2.0
Applications Samba share, custom scripts
External devices Possibility to connect external HDD, flash drive, additional modem, printer
Storage formats FAT, FAT32, NTFS
Connector 4 pin industrial DC power socket
PoE (passive) Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af and 802.3at standards
Ethernet 4 x RJ45 ports, 10/100 Mbps
Status LEDs 1 x bi-color connection status LED, 5 x connection strength LEDs, 4 x LAN status LEDs, 1 x Power LED
SIM 2 x SIM slots (Mini-SIM – 2FF), 1.8 V/3 V, external SIM holders
Input/output 10 pin industrial socket for inputs/outputs
Antennas 2 x SMA for LTE, 1 x SMA for GNNS, 2 x RP-SMA for WiFi antenna connectors
USB USB A port for external devices
SD card Micro SD card slot
Reset Reset/restore to default button
Casing material Aluminum housing, plastic panels
Mounting options DIN rail (can be mounted on two sides), flat surface placement
Operating temperature -40 °C to 75 °C
Operating humidity 10% to 90% non-condensing
Ingress Protection Rating IP30
MTBF 230000 h
Regulatory CE/RED, FCC, IC/ISED, EAC, RCM, PTCRB, RoHS, WEEE, Wi-Fi Alliance
Operator AT&T, Verizon
Vehicle ECE R10 (E-mark), ECE R118
Standards Draft EN 301 489-1 V2.2.0, Draft EN 301 489-17 V3.2.0, Draft EN 301 489-19 V2.1.0, Draft EN 301 489-52 V1.1.0, FCC 47 CFR Part 15B (2017), ANSI C63.4 (2014)
END EN61000-4-2:2009
RS EN 61000-4-3:2006 + A1:2008 + A2:2010
EFT EN 61000-4-4:2012
Surge immunity (Ethernet ports) EN 61000-4-5:2014, clause 7.1 of ITU-T K21
Transient and surges ISO 7632-2:2004
CS EN 61000-4-6:2009
DIP EN 61000-4-11:2004
Ingress Protect LST EN 60529:1999+A1+AC:2002
Vibration Class guideline-DNVGL-CG-0339:2016, EN 60068-2-6:2008

Dimensions

Capacity Up to 32 GB
Physical size Micro SD
Dimensions 80 mm x 106 mm x 46 mm (H x W x D)
Weight 280 g

Power

Input voltage range 9 – 30 VDC (4 pins industrial socket), reverse polarity protection; surge protection >31 VDC 10us max
Power consumption < 2 W idle, < 7 W Max
Power 4 pin industrial DC power socket
Surge immunity (AC Power Line) EN 61000-4-5:2006
Advertisement

User reviews

No reviews yet. Do you own a Teltonika RUT955 4G LTE Router? Be the first to rate it.

Share your experience

How many stars would you give?

Advertisement